Martin guitar string height specs
the normal string height that a martin should have when coming from the factory is 764ths on the low E string and 564ths' on the high e string. Both of those measurements are taken at the 12th fret from the top of the 12th fret to the bottom of the string.Ok, there you have it: for a perfect setup of your guitar, you'll have to adjust the neck relief, the saddle height, and the slots in the string nut. Your goal, of course, is to get the smallest gap between any string and any fret without getting string buzz. martin guitar string height specs
To me the guitar feels tighter and more responsive with less curve in the neck. With the saddle shaved down by about 132, theres still plenty of height above the bridge to give a good string break angle down to the bridge pins.
Martin acoustic guitars made after 1985 have an adjustable neck tension rod located at either the headstock or body end of the guitar. If you own a Martin guitar manufactured before 1985 and want the neck adjusted, consult a professional technician. String action is subjective, so experiment to find the action that works for your playing style. 2008 Martin OM 28M 716 both places 1951 Gibson J45 38 both places 1932 Gibson L00 716 at the edge of the soundhole, 1132 in front of the bridge All were taken from the bottom of the bass string to the soundboard, all guitars' action are at a skinny 18 , 12th fret, bass string.martin guitar string height specs Oct 23, 2010 Guitar necks tend to tilt toward the body over time, raising the action. Lowering the saddle a bit is common to deal with this. It also has an adjustable truss rod, and that is really used to adjust 'relief' not 'action height but will affect string height somewhat, especially in the middle part of the neck (e. g. 5th thru 10th fret or so).